Zamp portable solar kits are available from 40 watts up to 200 watts, manufacture part numbers are from ZS-40-P to ZS-200-P, and the latest generation USA models ZS-US-40S-P for the single panel 40 watt. The ZS-US-80-P, ZS-US-120-P, ZS-US-160-P and the ZS-US-200-P shown above. The US model is the all new USA made solar panel with the Omni track frame, new legs, and the rigid handle back on the frame itself.
They come complete with everything you need to charge your RV batteries via solar, including the solar charge controller, built in legs that pivot out and 15 feet of wire from the controller to the battery with detachable alligator clips, a built in fuse and the Zamp solar plug that plugs into the Zamp solar ready port HERE. If you need more distance to the batteries, you can add another 15 feet with the Zamp solar extension HERE part number ZS-HE-15-N.
The portable kits also have a weatherproof solar charge controller, along with a digital display that will show you battery volts, amps being produced via solar and accumulated amp hours produced for the day which resets at sunset every night. The controller is also adjustable so you can set the output voltage to your battery type. The setting include Gel, AGM, Wet and Calcium from 14.1 volts to 15.1 volts.
If you have a Furrion solar plug, you can use the Zamp to Furrion solar adapter HERE but note if you are buying a portable bugger than the 120 watt, it you will need to find your fuse that is between the Furrion port and the battery and replace it with a 15 amp fuse because the factory fuse is only 10 amps.