Home > Inverters >

Zamp Solar ZP-2000-PS

Zamp Solar ZP-2000-PS


 
Alternative Views:


Our Price: $521.00
Sale Price: $459.00
Savings: $62.00

Quantity in Stock:(Out of Stock)

Product Code: ZP-2000-PS
Qty:

Description
 

Zamp Solar 2000 Watt Pure Sine Wave Inverter – ZP-2000PS


Pure Sine Wave Inverters are the only way to go with sensitive electronics.


The alternative to a pure sign wave is a modified sign wave. A modified sign wave inverter is considered to have a blocky or dirty signal. It is possible to charge or operate a sensitive device off of this type of signal but a result is undue stress to the electrical components and a shorter lifespan. Using this type of inverter causes the components on the inside to work harder and generate more heat and resistance. Some HDTV’s, microwaves and other larger electronics won’t work with a modified signal and require a clean energy signal. DC to AC Inverters converts battery energy (Direct Current) to usable energy for regular household devices (Alternating Current). This take the 12 volts from the battery and converts it to 120 volts for regular equipment.
The 1,000 Watt Inverter (ZS-1000PS) and 2,000 Watt Inverter (ZS-2000PS) are both equipped with a remote switch port and a remote switch with 15′ lead wire making relocation the on/off switch to a more convenient location easy. The 2,000 Watt Inverter is equipped with a 2,000mA (2A) USB Port as compared with the lower wattage units with a 1,000mA (1A) USB Port.

Sizing an Inverter for Use

In order to get the correct sized inverter for your needs you will have to know what wattage the devices will use at 120 volts. This commonly found on tags and stamps located on the device. A 2000 watt pure sine wave inverter will operate devices up to 2000 watts either through a single outlet or between both of them at varying watts.

Specifications –

  • Remote Switch
    • 2,000 Watt inverter is equipped with a remote switch port
    • Remote Switch with 15′ of lead wire making it easy to place the switch in a convenient location.
  • 2,000 Watt Continuous Power and 4,000 Watts of Surge Protection
  • Pure Sine-Wave Output – A cleaner electrical signal that sensitive electronics use.
  • 3 – 120 Volt AC Output Plug
  • USB Port, 5v and 2,000mA
  • Load Control Cooling Fan > 100w
  • Soft Start Low Interference Technology
  • THD (Total Harmonic Distortion) is less than 3%
  • 5 Kinds of Protection
    • Input Under-Voltage Alarm
    • Under Voltage Protection
    • Over Voltage Protection
    • Overload Protection
    • Thermal Protection
  • Supplied with Terminal battery Clamps and Terminal Rings
Zamp Inverter's
Features
  • Includes remote with 25' of wire, and 3' battery cables for POS and NEG

Average Rating: Average Rating: 4 of 5 4 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
4 of 5 Made in USA? August 7, 2017
Reviewer: Tom from Oregon  
The inverter looks top notch and performs as expected. The user manual , while having the specs,  was written by someone that does not use English as their primary form of communication. Also, the help section for installing the remote power switch omitted how to open the cover. Just a photo with a screwdriver pointing at what appears to be a dimple, but turns out to be caps over the screws holding cover together, which are extremely difficult to remove.

Was this review helpful to you?